Item no.
NIST-2113
Unit
set
Shipment details
No Dangerous Good /not restricted
Back to your search result
Description
This Standard Reference Material (SRM) is intended primarily for the verification of the maximum force measured dynamically using a Charpy machine equipped with an instrumented 8-mm striker, in accordance with the current ASTM Standard E2298 or the current ISO Standard 14556. A unit of NIST-2113 consists of a set of four specimens needed to perform a single verification. NIST-2113 can also be used to verify the absorbed energy scale of the impact machine at the low-energy level. When testing is performed at room temperature, the force and absorbed energy scales can be verified simultaneously. This SRM can also be used to verify the absorbed energy scale at a test temperature of -40 °C, but no force information is available at this temperature. NIST-2113 is made from 4340 alloy steel. The bars are finished to length,stamped, heat-treated, and machined in SRM specimen lots of approximately 1200 to 2000 specimens. Each specimen has a lot number and an identification number (three or four digits). /// Sample value(s) - please ask for current certificate.
Contents
Miscellaneous
Certificate of Analysis (specimen)
Reference Material CoA specimen: for the current lot, please contact your customer service representative at info@labmix24.com
Product data sheet
View all available product details e.g. description, analytes/parameters, CAS Number, concentrations/values, sales unit/product format, method, source, transport information
NIST provides over 1300 Standard Reference Materials® as well as articles and practice guides describing the development, analysis and use of SRMs.
NIST Standard Reference Materials are used by analytical laboratories in industry, academia and government in order to facilitate commerce and trade and to advance research and development. The SRMs are produced by the engineering laboratory, the material measurement laboratory, and the physical measurement laboratory at NIST. They are available for chemical composition, physical properties, and engineering materials.