Item no.
NIST-1980
Unit
40 mL
Shipment details
No Dangerous Good /not restricted
Back to your search result
Description
This Standard Reference Material (SRM) is intended for use in the evaluation of equipment, and the validation of methodology used to measure electrophoretic mobility. A unit of NIST-1980 consists of a single 60 cm3 polyethylene bottle containing 40 cm3 of suspension, which is to be diluted prior to analysis. The suspension consists of 500 mg/L goethite (alpha-FeOOH) suspension saturated with 100 µmol/g phosphate in a 5 × 10-2 mol/L sodium perchlorate electrolyte solution at a pH of 2.5. The goethite powder consists of acicular particles with an average dimension of 60 nm × 20 nm as determined from electron microscopy and is consistent with previously reported data. The characteristics used for the selection of goethite as a standard were its long-term stability, ease of mobility control from positive to negative polarity by adjusting the phosphate concentration or pH, reproducibility of mobility measurements, and the narrow particle size distribution in the suspension. Additionally, this material was the subject of a previous interlaboratory analysis during which goethite was suggested as a potential electrophoresis standard. /// Sample value(s) - please ask for current certificate.
Contents
Miscellaneous
Certificate of Analysis (specimen)
Reference Material CoA specimen: for the current lot, please contact your customer service representative at info@labmix24.com
Product data sheet
View all available product details e.g. description, analytes/parameters, CAS Number, concentrations/values, sales unit/product format, method, source, transport information
NIST provides over 1300 Standard Reference Materials® as well as articles and practice guides describing the development, analysis and use of SRMs.
NIST Standard Reference Materials are used by analytical laboratories in industry, academia and government in order to facilitate commerce and trade and to advance research and development. The SRMs are produced by the engineering laboratory, the material measurement laboratory, and the physical measurement laboratory at NIST. They are available for chemical composition, physical properties, and engineering materials.